Increased bone resorption that outpaces increased bone formation: An important pathology of rapidly destructive coxarthrosis.

Rapid joint destruction caused by rapidly destructive coxarthrosis (RDC) can increase surgical complexity and intraoperative blood loss. This single-center retrospective study investigates osteoporosis-related biomarkers for early RDC diagnosis and explores new treatment targets. We included 398 hip joints from patients who underwent total hip arthroplasty, examining medical records for preoperative patient demographics, bone mineral density of the hip and lumbar spine from dual-energy X-ray absorptiometry scans, and osteoporosis-related biomarkers including TRACP-5b, total P1NP, intact parathyroid hormone, and homocysteine. We compared RDC and osteoarthritis (OA) patients, and univariate analysis showed that RDC patients were older (p < 0.001) and had lower serum levels of albumin (p < 0.001) and higher serum levels of TRACP-5b, total P1NP (p < 0.001), and homocysteine (p = 0.006). Multivariable analysis showed that the ratio of serum TRACP-5b to total P1NP had a more significant difference in RDC patients than in OA patients (p = 0.04). Serum TRACP-5b levels were negatively correlated with the time between RDC onset and blood collection, and Japanese Orthopedic Association pain score. Receiver operating characteristic curve analysis revealed that the ratio of serum TRACP-5b to total P1NP had the highest area under the curve value. This study is the first to demonstrate that the ratio of serum TRACP-5b to total P1NP-increased bone resorption that outpaces increased bone formation-is significantly elevated in patients with RDC and that TRACP-5b is higher in the early stages of RDC. Inhibiting serum levels of TRACP-5b, activated osteoclasts, during early RDC may suppress disease progression.

Stabilization and compensation strategy of the hip angle during gait in hip-osteoarthritis patients from the perspective of whole-body movement synergy.

BACKGROUND: The implementation of a strategy to control the hip angle during gait is important to avoid disease progression in patients with hip osteoarthritis (OA). RESEARCH QUESTION: Do patients with hip OA tend to stabilize their hip angles by a combination of whole-body movements during gait in terms of variability? METHODS: A public gait dataset comprising 80 asymptomatic participants and 106 patients with hip OA was used. Uncontrolled manifold analysis was performed using the joint angles as elemental variables and the hip joint angles as performance variables. The synergy index ΔV, variances of elemental variables that did not affect the performance variable (VUCM) and of those that affected the performance variable (VORT), and index of covariation strategy (COV) were calculated in sagittal and frontal plane. A one-sample t-test for statistical parametric mapping (SPM) analysis was used for ΔV and COV. Two-sample t-tests of SPM analyses were used for ΔV, VUCM, and VORT to compare the two groups. RESULTS: In both planes, the ΔV and COV were significantly larger than zero in both groups (p < 0.001). In the sagittal plane, the VORT was higher in the hip OA group than in the control group after 77 % of stance phase. In the frontal plane, the hip OA group had larger ΔV and VUCM after last half and last quartile of stance phase compared to the control group, respectively. The VORT was smaller in the hip OA group than in the control group. SIGNIFICANCE: The hip angle was stabilized in the hip OA group in the frontal plane but insufficiently stabilized in the sagittal plane; however, the patients changed their hip angle during the early phase of stance. The combination of whole-body movements contributed to the stabilization of hip angle.

Factors determining the resection ability of snares in cold snare polypectomy: Construction of an ex vivo model for accurately evaluating resection ability.

OBJECTIVES: Cold snare polypectomy (CSP)-dedicated snares (DSs) may have a higher resection ability than conventional snares. However, a model that can accurately and objectively evaluate and compare the resection ability of each snare has yet to be determined, and characteristics of snare parts that increase resection ability remain unknown. Therefore, we elucidated DSs' resection ability and all characteristics of the parts required for acquiring high resection ability. METHODS: An ex vivo model for evaluating resection ability was generated using human colons obtained from forensic autopsy specimens. The force required to resect a 15 mm wide human colonic mucosa (FRR) was measured using this model; if the FRR is small, the resection ability is high. Next, after measuring the stiffness of each snare part, the correlation between the stiffness and resection ability was analyzed. RESULTS: The force required to resect using SnareMaster Plus, Micro-Tech Cold Snare, Captivator Cold, Exacto Cold Snare, or Captivator II was 13.6 ± 1.0, 12.5 ± 1.2, 7.4 ± 1.2, 6.5 ± 1.0, and 28.7 ± 3.7 N, respectively. All DSs had significantly lower FRR than the conventional snare (Captivator II) and had higher resection ability (P < 0.001). A negative correlation was found between FRR and sheath or wire spindle stiffness, with correlation coefficients of 0.72 (P = 0.042) or 0.94 (P < 0.001), respectively. Moreover, 1 × 7 type wire rings had significantly higher friction coefficients than 1 × 3 type wire rings (P < 0.002). CONCLUSION: Sheath and wire spindle stiffness should be increased to increase resection ability; 1 × 7 type wire rings may be suitable for CSP-snare parts.

Association of osteoporosis and high serum homocysteine levels with intraoperative periprosthetic fracture during total hip arthroplasty: a propensity-score matching analysis.

INTRODUCTION: Intraoperative periprosthetic fracture, one of the most frequent complications of total hip arthroplasty, is a very important factor that affects rehabilitation, hospitalization time, and cost of treatment. Osteoporosis is common in total hip arthroplasty patients and likely contributes to the increasing incidence of periprosthetic fracture. Despite this awareness, preoperative and postoperative osteoporosis evaluations remain insufficient. The purpose of this study was to evaluate the relationships between the occurrence of intraoperative periprosthetic fractures and both bone mineral density (BMD) and osteoporosis-related biomarkers. MATERIALS AND METHODS: This single-center retrospective study included a total of consecutive 487 hip joints of patients with a mean age of 65.5 ± 11.8 years who underwent total hip arthroplasty between July 2017 and December 2020. Patients with low BMD defined as T-score < -1.0 versus those with normal BMD were matched by a 1:1 propensity score to balance for patient baseline characteristics, and outcome was analyzed by a modified Poisson regression model. Our primary outcome was the incidence of intraoperative periprosthetic fracture during surgery. We also investigated the effect modification of osteoporosis-related biomarkers, including tartrate-resistant acid phosphatase 5b (TRACP-5b), total procollagen type 1 amino-terminal propeptide (total P1-NP), intact parathyroid hormone (intact PTH), and homocysteine, on osteoporosis and outcomes. RESULTS: After matching, 250 patients were analyzed. The risk of fracture was significantly higher in patients with low BMD than in normal BMD patients (Incidence rate ratio 5.00 [95% CI 1.11-22.43], p = 0.036). We also observed significant effect of high serum homocysteine on the occurrence of intraoperative fractures (Incidence rate ratio 8.38 × 106 [95% C; 3.44 × 106-2.01 × 107], p < 0.01). CONCLUSION: Preoperative osteoporosis and high serum homocysteine levels were risk factors for intraoperative periprosthetic fractures. LEVEL OF EVIDENCE: III, A single-center retrospective study.

Discovery of E2730, a novel selective uncompetitive GAT1 inhibitor, as a candidate for anti-seizure medication.

OBJECTIVE: As of 2022, 36 anti-seizure medications (ASMs) have been licensed for the treatment of epilepsy, however, adverse effects (AEs) are commonly reported. Therefore, ASMs with a wide margin between therapeutic effects and AEs are preferred over ASMs that are associated with a narrow margin between efficacy and risk of AEs. E2730 was discovered using in vivo phenotypic screening and characterized as an uncompetitive, yet selective, inhibitor of γ-aminobutyric acid (GABA) transporter 1 (GAT1). Here, we describe the preclinical characteristics of E2730. METHODS: Anti-seizure effects of E2730 were evaluated in several animal models of epilepsy: corneal kindling, 6 Hz-44 mA psychomotor seizure, amygdala kindling, Fragile X syndrome, and Dravet syndrome models. Effects of E2730 on motor coordination were assessed in accelerating rotarod tests. The mechanism of action of E2730 was explored by [3 H]E2730 binding assay. The GAT1-selectivity over other GABA transporters was examined by GABA uptake assay of GAT1, GAT2, GAT3, or betaine/GABA transporter 1 (BGT-1) stably expressing HEK293 cells. To further investigate the mechanism for E2730-mediated inhibition of GAT1, in vivo microdialysis and in vitro GABA uptake assays were conducted under conditions of different GABA concentrations. RESULTS: E2730 showed anti-seizure effects in the assessed animal models with an approximately >20-|fold margin between efficacy and motor incoordination. [3 H]E2730 binding on brain synaptosomal membrane was abolished in GAT1-deficient mice, and E2730 selectively inhibited GAT1-mediated GABA uptake over other GABA transporters. In addition, results of GABA uptake assays showed that E2730-mediated inhibition of GAT1 positively correlated to the level of ambient GABA in vitro. E2730 also increased extracellular GABA concentration in hyperactivated conditions but not under basal levels in vivo. SIGNIFICANCE: E2730 is a novel, selective, uncompetitive GAT1 inhibitor, which acts selectively under the condition of increasing synaptic activity, contributing to a wide margin between therapeutic effect and motor incoordination.

Evaluation of Environmental Stability and Disinfectant Effectiveness for Human Coronavirus OC43 on Human Skin Surface.

The environmental stability of human coronavirus OC43 (HCoV-OC43) on the surface of human skin and the effectiveness of disinfectant against HCoV-OC43, which are important to prevent contact transmission, have not been clarified in previous studies. Using previously generated models, we evaluated HCoV-OC43 stability and disinfection effectiveness. Then we compared the results with those for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The median survival time of HCoV-OC43 on the surface of human skin was 24.6 h (95% confidence interval, 19.7 to 29.6 h), which was higher than that of SARS-CoV-2 (10.8 h). Although the in vitro disinfectant effectiveness evaluation showed that HCoV-OC43 has a higher ethanol resistance than SARS-CoV-2, HCoV-OC43 on the skin surface was completely inactivated by a minimum of 50% ethanol within 5 s (the log reduction values were >4.0). Moreover, 1.0% chlorhexidine gluconate and 0.2% benzalkonium chloride showed relatively high disinfectant effectiveness, and the log reduction values when these disinfectants were applied for 15 s were >3.0. HCoV-OC43 is highly stable on the skin surface, which may increase the risk of contact transmission. Although HCoV-OC43 has relatively high ethanol resistance, appropriate hand hygiene practices with current alcohol-based disinfectants sufficiently reduce the risk of contact transmission. IMPORTANCE This study revealed the environmental stability of HCoV-OC43 and disinfectant effectiveness against HCoV-OC43, which had not been demonstrated in previous studies. HCoV-OC43 is highly stable on the surface of human skin, with a survival time of approximately 25 h. High stability of HCoV-OC43 may increase the risk of contact transmission. Furthermore, the in vitro disinfectant effectiveness evaluation showed that HCoV-OC43, which is classified as an envelope virus, has a relatively high ethanol resistance. This finding suggests that disinfectant effectiveness may vary greatly depending on the virus and that each virus targeted for infection control should be evaluated individually. HCoV-OC43 on the skin surface was rapidly inactivated by 50% ethanol, which suggests that appropriate hand hygiene practices with current alcohol-based disinfectants can sufficiently reduce the risk of HCoV-OC43 contact transmission.

Neuroprotective activity of a virus-safe nanofiltered human platelet lysate depleted of extracellular vesicles in Parkinson's disease and traumatic brain injury models.

Brain administration of human platelet lysates (HPL) is a potential emerging biotherapy of neurodegenerative and traumatic diseases of the central nervous system. HPLs being prepared from pooled platelet concentrates, thereby increasing viral risks, manufacturing processes should incorporate robust virus-reduction treatments. We evaluated a 19 ± 2-nm virus removal nanofiltration process using hydrophilic regenerated cellulose hollow fibers on the properties of a neuroprotective heat-treated HPL (HPPL). Spiking experiments demonstrated >5.30 log removal of 20-22-nm non-enveloped minute virus of mice-mock particles using an immuno-quantitative polymerase chain reaction assay. The nanofiltered HPPL (NHPPL) contained a range of neurotrophic factors like HPPL. There was >2 log removal of extracellular vesicles (EVs), associated with decreased expression of pro-thrombogenic phosphatidylserine and procoagulant activity. LC-MS/MS proteomics showed that ca. 80% of HPPL proteins, including neurotrophins, cytokines, and antioxidants, were still found in NHPPL, whereas proteins associated with some infections and cancer-associated pathways, pro-coagulation and EVs, were removed. NHPPL maintained intact neuroprotective activity in Lund human mesencephalic dopaminergic neuron model of Parkinson's disease (PD), stimulated the differentiation of SH-SY5Y neuronal cells and showed preserved anti-inflammatory function upon intranasal administration in a mouse model of traumatic brain injury (TBI). Therefore, nanofiltration of HPL is feasible, lowers the viral, prothrombotic and procoagulant risks, and preserves the neuroprotective and anti-inflammatory properties in neuronal pre-clinical models of PD and TBI.

Wear rate and osteolysis in two types of second-generation annealed highly cross-linked polyethylene in total hip arthroplasty: A retrospective comparative study with a minimum of five years.

BACKGROUND: As no previous study has directly compared the linear wear rate in two types of second-generation annealed highly cross-linked polyethylene, we performed a retrospective study with a minimum of 5-year follow-up to assess primary arthroplasties in the (1) wear rates and (2) incidence of osteolysis of the two types of HXLPE. HYPOTHESIS: There was no significant difference in the linear wear rate and the incidence of osteolysis between the two types of second-generation annealed highly cross-linked polyethylene. PATIENTS AND METHODS: In this single-center study, we reviewed 257 cases of primary cementless total hip arthroplasties between 2011 and 2015, which were performed with 32mm delta ceramic on second-generation annealed highly cross-linked polyethylene (X3 and E1 were used in 105 and 103 cases, respectively.). The mean wear rate was evaluated using a computer-assisted method, and the incidence of osteolysis was evaluated based on the appearance of a localized area with loss of trabecular bone or cortical erosion adjacent to the implants during the latest follow-up. RESULTS: In total, we evaluated 208 cases, followed postoperatively for over 5 years (mean, 6.1 years, range: 5.0-8.0). There were no significant differences between the two groups with respect to age (list in order of Group X, Group E, p value) (61.2±12.3, 62.7±12.1, p=0.36), sex (ratio of male: 17.1%, 14.6%, p=0.61), body mass index (22.9±3.7, 22.8±4.0, p=0.91), pre- (49.9±14.8, 48.5±13.8, p=0.49) and post-operative (91.3±9.1, 92.7±7.0, p=0.23) Japanese Orthopaedic Association Hip Score, cup size (50.8±3.0, 50.9±2.2, p=0.70), cup inclination (38.7±4.8, 37.6±4.8, p=0.10), and cup anteversion (18.7±6.9, 18.5±7.6, p=0.80). The mean linear wear rates of the X3 and E1 groups were 0.057±0.039 (range: 0-0.16) and 0.054±0.037mm/year (range: 0-0.15), respectively (p=0.61). No osteolysis was found on the final plain radiographs in both groups. DISCUSSION: This study revealed that both types of highly cross-linked polyethylene have excellent linear wear rates and were equally safe to use. However, the difference between the two materials in terms of the long-term wear rate should be further validated. LEVEL OF EVIDENCE: III; retrospective case control study.

Normal and Range Value Evaluations Using Heart Risk View-Function Based on the Japanese Societyof Nuclear Medicine Working Group Database.

Background: Gated myocardial perfusion single-photon emission computed tomography (SPECT) has been used to non-invasively evaluate the left ventricular (LV) volume and function. This study aimed to measure the normal and range values for heart risk view-function (HRV-F) software using the Japanese Society of Nuclear Medicine Working Group (JSNM-WG) normal database and clarify the characteristics of the normal database. Methods:We used 206 myocardial perfusion short-axis images from the normal database. Ejection fraction (EF), end-systolic volume (ESV), end-diastolic volume (EDV), peak filling rate (PFR), 1/3 mean filling rate (MFR), time to PFR (TTPF), and TTPF divided by RR interval (TPFR/RR) were calculated. Phase parameters of 95% histogram bandwidth and standard deviation were also computed using the phase analysis. The relationships among phase parameters, LV volumes, and body surface area (BSA) were evaluated in the age group of ≤65 years. Results: Higher EF was observed in females than in males (p<0.0001). EDV and ESV were significantly higher in males than in females (p<0.0001). Additionally, PFR and 1/3 MFR significantly differed between sexes (p≤0.075). Phase parameters were higher in males than in females, and higher at stress than at rest. All diastolic parameters showed no significant differences between sexes in any age group, whereas differences have remained in phase values. Phase parameters were weakly correlated with EDV (r=0.31), ESV (r=0.43), and BSA (r=0.27), respectively. Conclusions: Mean normal and range values of the normal database were determined using the HRV-F software. The normal and range values can help diagnose gated SPECT data in patients with cardiac diseases.

The prevalence and treatment of osteoporosis in patients undergoing total hip arthroplasty and the levels of biochemical markers of bone turnover.

AIMS: Osteoporosis is common in total hip arthroplasty (THA) patients. It plays a substantial factor in the surgery's outcome, and previous studies have revealed that pharmacological treatment for osteoporosis influences implant survival rate. The purpose of this study was to examine the prevalence of and treatment rates for osteoporosis prior to THA, and to explore differences in osteoporosis-related biomarkers between patients treated and untreated for osteoporosis. METHODS: This single-centre retrospective study included 398 hip joints of patients who underwent THA. Using medical records, we examined preoperative bone mineral density measures of the hip and lumbar spine using dual energy X-ray absorptiometry (DXA) scans and the medications used to treat osteoporosis at the time of admission. We also assessed the following osteoporosis-related biomarkers: tartrate-resistant acid phosphatase 5b (TRACP-5b); total procollagen type 1 amino-terminal propeptide (total P1NP); intact parathyroid hormone; and homocysteine. RESULTS: The prevalence of DXA-proven hip osteoporosis (T-score ≤ -2.5) among THA patients was 8.8% (35 of 398). The spinal osteoporosis prevalence rate was 4.5% (18 of 398), and 244 patients (61.3%; 244 of 398) had osteopenia (-2.5 < T-score ≤ -1) or osteoporosis of either the hip or spine. The rate of pharmacological osteoporosis treatment was 22.1% (88 of 398). TRACP-5b was significantly lower in the osteoporosis-treated group than in the untreated group (p < 0.001). CONCLUSION: Osteoporosis is common in patients undergoing THA, but the diagnosis and treatment for osteoporosis were insufficient. The lower TRACP-5b levels in the osteoporosis-treated group - that is, osteoclast suppression - may contribute to the reduction of the postoperative revision rate after THA.Cite this article: Bone Joint Res 2022;11(12):873-880.

Relationship among airborne pollen, sensitization, and pollen food allergy syndrome in Asian allergic children.

Background: Causes of pediatric pollen food allergy syndrome (PFAS) differ depending on airborne pollen levels in a particular region. We aimed to analyze airborne pollen counts, IgE sensitization rates, and PFAS incidence among children with allergies in South Korea and Japan. Methods: This cross-sectional study included children aged 5-17 years with allergies in 2017. Airborne pollen samples were collected from Busan in South Korea, and Fukuoka and Tochigi in Japan. Questionnaires were used to assess bronchial asthma, seasonal allergic rhinitis, atopic dermatitis, food allergy, and PFAS. The serum IgE specific to Dermatophagoides pteronyssinus, pollen, tomato, and peach were investigated. Results: In total, 57, 56, and 20 patients from Busan, Fukuoka, and Tochigi, respectively, were enrolled. Airborne Japanese cedar and cypress pollen were predominant in Fukuoka and Tochigi, whereas pine and alder pollen were predominant in Busan. Children with allergies in Fukuoka and Tochigi had a significantly higher sensitization rate to Japanese cedar, cypress, juniper, orchard grass, ragweed, Japanese hop, and tomato compared with children in Busan. In Fukuoka and Tochigi, where Japanese cedar and cypress pollen were frequently scattered, high sensitizations among allergic children were observed. The sensitization rate was not affected by the pollen count in alder, grass, ragweed, and Japanese hop. In multivariable analysis, only alder sensitization was found to be associated with PFAS (odds ratio: 6.62, 95% confidence interval: 1.63-26.87, p = 0.008). In patients with PFAS in Busan and Tochigi, peach associated with birch allergen Bet v 1 was a causative food item for PFAS. Moreover, PFAS was associated with ragweed and Japanese hop pollen sensitization in Fukuoka. Conclusion: Regardless of pollen counts, alder pollen sensitization was associated with PFAS in children. Ragweed and Japanese hop pollen sensitization were associated with PFAS, particularly among children in southern Japan.

Vision Feedback Control for the Automation of the Pick-and-Place of a Capillary Force Gripper.

In this paper, we describe a newly developed vision feedback method for improving the placement accuracy and success rate of a single nozzle capillary force gripper. The capillary force gripper was developed for the pick-and-place of mm-sized objects. The gripper picks up an object by contacting the top surface of the object with a droplet formed on its nozzle and places the object by contacting the bottom surface of the object with a droplet previously applied to the place surface. To improve the placement accuracy, we developed a vision feedback system combined with two cameras. First, a side camera was installed to capture images of the object and nozzle from the side. Second, from the captured images, the contour of the pre-applied droplet for placement and the contour of the object picked up by the nozzle were detected. Lastly, from the detected contours, the distance between the top surface of the droplet for object release and the bottom surface of the object was measured to determine the appropriate amount of nozzle descent. Through the experiments, we verified that the size matching effect worked reasonably well; the average placement error minimizes when the size of the cross-section of the objects is closer to that of the nozzle. We attributed this result to the self-alignment effect. We also confirmed that we could control the attitude of the object when we matched the shape of the nozzle to that of the sample. These results support the feasibility of the developed vision feedback system, which uses the capillary force gripper for heterogeneous and complex-shaped micro-objects in flexible electronics, micro-electro-mechanical systems (MEMS), soft robotics, soft matter, and biomedical fields.

Short stature and short distance between the anterior acetabular rim to the femoral nerve are risk factors for femoral nerve palsy following primary total hip arthroplasty using the modified Watson-Jones approach.

BACKGROUND: Nerve palsy following total hip arthroplasty (THA) critically impacts patient clinical function. However, few studies have focused on femoral nerve palsy (FNP) following THA via the modified Watson-Jones approach. Previous reports have suggested that THA, regardless of the approach, is associated with several FNP risk factors, including female gender, hip dysplasia, revision surgery, and short stature. Magnetic resonance imaging (MRI) has suggested that a shorter distance between the femoral nerve and the anterior acetabular edge (dFN) is related to FNP after THA. The purposes of this study were: 1) to determine the presumed risk factors through a retrospective investigation of FNP clinical courses, and 2) to identify the relationships between FNP occurrence and the short dFN following primary THA via the modified Watson-Jones approach. HYPOTHESIS: Short stature is a risk factor for femoral nerve palsy following THA. i.e. a significant difference in dFN exists between patients with and without FNP. PATIENTS AND METHODS: This retrospective case-control study was performed at a single university hospital. From January 2016 to December 2020, 676 THAs were performed via the modified Watson-Jones approach at our institution. These included 495 THAs performed in the supine position and 181 in the lateral position. In this study, FNP was defined as weakness of the quadriceps femoris (manual muscle test

Differences in environmental stability among SARS-CoV-2 variants of concern: both omicron BA.1 and BA.2 have higher stability.

OBJECTIVES: The increased infectivity and transmissibility of SARS-CoV-2 variants of concern (VOCs) could cause significant human and economic damage. Hence, understanding their characteristics is crucial to control infection. We evaluated the environmental stability of the Wuhan strain and all VOCs (Alpha, Beta, Gamma, Delta, Omicron BA.1, and Omicron BA.2 variants) on plastic and human skin surfaces and their disinfection efficacy. METHODS: To evaluate environmental stability, residual virus titres on plastic and human skin surfaces were measured over time. Their survival time and half-life were calculated using regression analysis. The effectiveness of ethanol-based disinfectants at different concentrations was determined by in vitro and ex vivo evaluations. RESULTS: On plastic and skin surfaces, the Alpha, Beta, Delta, and Omicron variants exhibited approximately two-fold longer survival times than the Wuhan strain; the Omicron variants had the longest survival time. The median survival times of the Wuhan strain and the Alpha, Beta, Gamma, Delta, and Omicron (BA.1 and BA.2) variants on human skin surface were 8.6, 19.6, 19.1, 11.0, 16.8, 21.1, and 22.5 h, respectively. The in vitro evaluation showed that the Wuhan strain and the Alpha, Beta, Gamma, Delta, and Omicron (BA.1 and BA.2) variants were completely inactivated within 15 s by 32.5%, 35%, 35%, 32.5%, 35%, 40%, and 40% ethanol, respectively. However, all viruses on human skin were completely inactivated by exposure to 35% ethanol for 15 s. CONCLUSIONS: SARS-CoV-2 VOCs, especially the Omicron variants, have higher environmental stability than the Wuhan strain, increasing their transmission risk and contributing to their spread.

Design, Synthesis, and Optoelectronic Properties of the High-Purity Phase in Layered AETMN2 (AE = Sr, Ba; TM = Ti, Zr, Hf) Semiconductors.

We report the synthesis and optoelectronic properties of high phase-purity (>94 mol %) bulk polycrystals of KCoO2-type layered nitrides AETMN2 (AE = Sr, Ba; and TM = Ti, Zr, Hf), which are expected to exhibit unique electron transport properties originating from their natural two-dimensional (2D) electronic structure, but high-purity intrinsic samples have yet been reported. The bulks were synthesized using a solid-state reaction between AENH and TMN precursors with NaN3 to achieve high N chemical potential during the reaction. The AETMN2 bulks are n-type semiconductors with optical band gaps of 1.63 eV for SrTiN2, 1.97 eV for BaZrN2, and 2.17 eV for BaHfN2. SrTiN2 and BaZrN2 bulks show degenerated electron conduction due to the natural high-density electron doping and paramagnetic behavior in all of the temperature ranges examined, while such unintentional carrier generation is largely suppressed in BaHfN2, which exhibits nondegenerated electron conduction. The BaHfN2 sample also exhibits weak ferromagnetic behavior at temperatures lower than 35 K. Density functional theory calculations suggest that the high-density electron carriers in SrTiN2 come from oxygen impurity substitution at the N site (ON) acting as a shallow donor even if the high-N chemical potential synthesis conditions are employed. On the other hand, the formation energy of ON becomes larger in BaHfN2 because of the stronger TM-N chemical bonds. Present results demonstrate that the easiness of impurity incorporation is designed by density functional calculations to produce a more intrinsic semiconductor in wider chemical conditions, opening a way to cultivating novel functional materials that are sensitive to atmospheric impurities and defects.

Higher Viral Stability and Ethanol Resistance of Avian Influenza A(H5N1) Virus on Human Skin.

Evaluating the stability of highly pathogenic avian influenza viruses on human skin and measuring the effectiveness of disinfectants are crucial for preventing contact disease transmission. We constructed an evaluation model using autopsy skin samples and evaluated factors that affect the stability and disinfectant effectiveness for various subtypes. The survival time of the avian influenza A(H5N1) virus on plastic surfaces was ≈26 hours and on skin surfaces ≈4.5 hours, >2.5-fold longer than other subtypes. The effectiveness of a relatively low ethanol concentration (32%-36% wt/wt) against the H5N1 subtype was substantially reduced compared with other subtypes. Moreover, recombinant viruses with the neuraminidase gene of H5N1 survived longer on plastic and skin surfaces than other recombinant viruses and were resistant to ethanol. Our results imply that the H5N1 subtype poses a higher contact transmission risk because of its higher stability and ethanol resistance, which might depend on the neuraminidase protein.

Stability of SARS-CoV-2 and influenza virus varies across different paper types.

INTRODUCTION: The assessment of the risk of virus transmission through papers, such as postcards, is important. However, the stability of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and influenza A virus (IAV) on different types of papers is currently unknown. Investigation of the survival time of these viruses on different types of papers will provide insights into their risk of long-distance transport by postal items. METHODS: We evaluated the stability of SARS-CoV-2 and IAV, mixed with a culture medium, on the surface of postcards with various coatings, including plain paper (PP), inkjet paper (IP), and inkjet photo paper (IPP). The surface structure of each paper was microscopically assessed. RESULTS: The surface structures of PP, IP, and IPP varied greatly depending on the presence or absence, and type, of coat layer, regardless of the base material. IP and IPP surfaces were less conducive to virus survival than PP surfaces, because of the difference in surface shapes. The survival times of SARS-CoV-2 on each paper were approximately 59.8 (PP), 6.5 (IP), and 9.8 h (IPP), and significantly longer than those of IAV (10.3, 1.8, and 3.3 h, respectively). CONCLUSIONS: The risk of SARS-CoV-2 transmission via paper, such as postcards, is significantly higher than that of IAV transmission. While PP, IP, and IPP have the same base material, their surface structures differ, which affects viral stability. The IP and IPP surfaces are less suitable for virus survival. This study provides novel insights into the risks of viral transmission via paper.

Difference in tapered wedge stem alignment between supine and lateral position in cementless total hip arthroplasty via modified Watson-Jones anterolateral approach.

BACKGROUND: Whether different body positions during surgery affect postoperative stem alignment in total hip arthroplasty (THA) remains unclear. The purpose of this study was to clarify differences in tapered wedge stem alignment between supine and lateral positions in THA under the modified Watson-Jones anterolateral approach. METHODS: We reviewed 242 consecutive, primary cementless THAs performed with ceramic-on-cross-linked polyethylene via the modified Watson-Jones approach in either supine or lateral positions between 2009 and 2015 (supine group: 113 cases; lateral group: 129 cases). No specific reasons to select supine or lateral positions for the surgery were given during the study period. Computed tomography was performed pre- and postoperatively to measure preoperative femoral anteversion and postoperative stem anteversion, respectively. Stem alignment in coronal and sagittal planes was also evaluated. RESULTS: Mean difference in stem anteversion and femoral anteversion was 8.6 ± 9.4 in the supine position and 13.0 ± 11.4 in the lateral position (p = 0.0013). Although no significant difference was seen between groups for stem alignment in the coronal plane, flexed implantation was more likely in the supine group (46/113, 40.7%) than in the lateral group (20/129, 15.5%). A significant correlation was found between femoral anteversion and stem anteversion in both the supine and lateral groups (r = 0.68, p < 0.0001 and r = 0.52, p < 0.0001, respectively). CONCLUSION: Although stem anteversion was more strongly correlated with femoral anteversion in the supine position than in the lateral position, neutral position in the sagittal plane was more likely to be found with the lateral position than with the supine position. Surgeons can achieve ideal stem positioning by considering these results in the modified Watson-Jones approach in both the supine and lateral positions.

Evaluation of the Residual Disinfection Effects of Commonly Used Skin Disinfectants against Viruses: An Innovative Contact Transmission Control Method.

Lasting disinfection effects, that is, the residual disinfection effects (RDEs), of skin-coated disinfectants have rarely been considered for infection control owing to the challenges involved in the accurate evaluation of RDEs. In this study, we constructed a new skin evaluation model and determined the RDEs of existing disinfectants against viruses. Our results showed that ethanol and isopropanol had no RDE, whereas povidone-iodine, chlorhexidine gluconate, and benzalkonium chloride (BAC) exhibited RDEs, with 10% povidone-iodine and 0.2% BAC showing particularly strong RDEs. The RDE of 0.2% BAC was strong enough to reduce the median survival times of severe acute respiratory syndrome coronavirus-2, human coronavirus-OC43, and influenza virus from 670 to 5.2, 1300 to 12, and 120 to 4.2 min, respectively. Additionally, this strong RDE was maintained even 4 h after coating the skin. Clinical data also showed that the strong RDE of 0.2% BAC was maintained for more than 2 h. Thus, applying disinfectants with strong RDEs on the skin correlates with a reduction in virus survival time and appears to create a skin surface environment that is not conducive to virus survival. A prolonged reduction in virus survival decreases the contact transmission risk, thereby enabling stronger infection control.

Comparison of sodium alginate-based and sodium hyaluronate-based submucosal injection materials based on rheological analysis.

As a viscous high-performance submucosal injection material (SIM) used in endoscopic submucosal dissection (ESD), sodium alginate-based SIM (SA-SIM) was recently introduced as high-performance SIM equivalent to sodium hyaluronate-based SIM (HA-SIM) in Japan. However, a comprehensive, detailed comparison of SA and HA is yet to be performed. In this study, we precisely measured the viscoelastic properties, submucosal elevation height (SEH), and injection pressure (IP). Furthermore, we compared the outcomes of ESD using an ex vivo ESD model. There was no significant difference in SEHs between HA-SIM and SA-SIM at all post-injection times, and the IP of the SA-SIM injection was significantly higher than that of the HA-SIM injection in all conditions (P < 0.0001). The viscosity at high shear rates of SA-SIM was higher than that of HA-SIM; this result was consistent with SEH/IP measurement results. No significant difference was observed in ESD procedure time and total volume of injected SIM between HA-SIM and SA-SIM (18.1 ± 6.7 and 17.8 ± 6.0 min, P = 0.8987; 13.3 ± 5.3 and 11.6 ± 5.9 ml, P = 0.4658, respectively). Although SA-SIM was slightly more difficult to inject than HA-SIM, there was no significant difference in performance between the materials. Thus, this basic study demonstrated that SA-SIM can be used for endoscopic treatment as well as HA-SIM, and supported previous clinical research data.